Baptism Camera Routing : Ross Router

Navigate to the Router

Open The Dashboard Application

This application should be in the desktop dock on the ProPresenter computer. If not, just look in the applications folder for "dashboard".

Four times a year, you'll need to swap the input on the switcher to use the Baptism Camera. We don't actually do this in the switcher but rather through the Ross router. This article covers how to successfully make that adjustment.

Which Video Router do you have?

Navigate to the Router

On the Left - Open Router Utilities

Click on the router name. E.g. "NOC Router"

Double Click the word Switchboard

Now Route!

Select the row labeled SW IN 7 under the Output column

On the far right is a column with different aspects of the signal you can route. Ex. route only audio or only video. Select the button that says "MD Vid" to route the video signal.

Select the input WP IN 13 (CAM) or the button labeled for the Cam Input

To Reset back after Baptism Weekend

Select the row labeled "SW IN 7" under the Output column

On the far right is a column with different aspects of the signal you can route. Ex. route only audio or only video. Select the button that says "MD Vid" to route the video signal.

Click the button on the Input column for STG DISP

Verify the WP IN 13 is set back to STG DISP

Now Route!

Double click the "Default Panel" button

Click the "Take" Button in the lower right hand side of Dashboard